Assistere nella selezione dei prodotti

FGDC-T-125A-V-0.0M
22060000051

Charging device socket outlet for charging electric vehicles (EVs) with direct current (DC), compatible with the national standard DC vehicle charging device plug for installation in EVs

confronto

Tipo di prodotti

Solo 4 prodotti possono essere confrontati ogni volta. Si prega di selezionare i prodotti che si desidera sostituire.

    • Panoramica
    • Dati tecnici
    • Accessori
    • Certificazione
    • Dati aziendali
    • Scarica

    Certificazione del prodotto

    Vantaggi del prodotto

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. Modello 3D
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Temperature Sensor
    9. Environmental Product Compliance
    10. Cable
    11. Dimension

    Modello 3D

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP55(coupling)

    Electrical characteristics

    Maximum charge power125KW
    93KW
    Phase3
    Power pin quantity9 (DC+,DC-,PE,A+,A-,S+,S-,CCS1,CCS2)
    Power contact rated voltage750
    1000
    Quantity of signal contacts4(S+,S-,CCS1,CCS2)
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsCrimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)
    PT1000

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force<140N
    Pull out force< 140N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Mounting hole diameter7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Locking device

    Lock typeSecured by locking device after insertion

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current1 mA (1 V at 0°C )
    Recommendation to measure tolerance on current sensors±1K
    Temperature range_50 °C ... 150 °C
    Temperature coefficient (TCR)3850 ppm/K
    Long-term stability(maximum R0-Drift)0.06 % (After 1000 hours at 130°C )
    Shutdown temperature90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Cable

    Cable composition2 x35 mm² + 1 x 25 mm² + 2 × 4 mm² + 3× 0.75 mm²

    Dimension

    Depth84.2mm
    Hole diameter72 mm x 72 mm
    Wire length0m
    Height95mm

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 750V
    Rated current 125A
    IP class IP54
    numero d'ordine 22060000051
    Unità di imballaggio 5pcs/box
    Quantità di ordine minimo 5
    Peso dei prodotti (senza imballaggio)
    Online consultation