>
Prodotto >
Caricabatterie Per Veicoli Elettrici >
Presa di ricarica >
Presa di ricarica per pile di ricarica >
FEAC-S-032A-P-0.0M
FEAC-S-032A-P-0.0M
22070000039
Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)
- Panoramica
- Dati tecnici
- Accessori
- Certificazione
- Dati aziendali
- Scarica
Certificazione del prodotto
Vantaggi del prodotto
☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design☑The surface of power and signal contacts are silver-plated
☑Certified to IATF 16949:2016
☑Ergonomic and easy to operate
- Modello 3D
- Environmental conditions
- Electrical characteristics
- Mechanical properties
- Installation
- Marking material
- Locking device
- Lock actuator
- Cable
- Bag
- Temperature Sensor
- Environmental Product Compliance
- Dimension
Modello 3D
Environmental conditions
| Maximum altitude | 5000m(Above sea level ) |
| Ambient temperature (operation) | － 30 °C ~ 50 °C |
| Ambient temperature (storage / transport) | － 40 °C ~ 80 °C |
| IP class | IP54（protection cover） |
Electrical characteristics
| Maximum charge power | 8KW |
| Phase | 1 |
| Power pin quantity | 3 |
| Rated current of high-power contacts | 32 |
| Power contact rated voltage | 250 |
| Quantity of signal contacts | 2 |
| Signal contact rated current | 2 |
| Signal contact rated voltage | 30 |
| Signal transmission type | Pulse width adjustment |
| Connection method precautions | Screw connection |
| Temperature measurement | NTC |
Mechanical properties
| Insertion/pullout cycle | 10000 |
| Insertion force | < 100N |
| Pull out force | < 100N |
Installation
| Available installation location | Rear board installation |
| Limit of the installation location | Only allow 0 to 90 degrees frontal tilt |
| Lock actuator installation location | Top center, can only be installed at the rear |
| Mounting hole diameter | 6.00 mm (ø) |
Marking material
| Shell color | black |
| Customization basis | Provided according to customer requirements |
| Contact surface material | Ag |
| Marking material | Plastic |
Locking device
| Lock type | Secured by locking device after insertion |
Lock actuator
| Poles of pluggable connectors | 3 |
| Motor possible supply voltage range | 9-15.5V |
| Response time | 1s |
| Service life | 10000 times load |
| Ambient temperature (operation) | _40 °C ... 80 °C |
| Cable length | 0.4m |
Cable
| Cable composition | 2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm² |
| 3*6mm²+2*0.75mm² |
Bag
| color | Blue |
Temperature Sensor
| Sensor type | NTC |
| Temperature range | _30 °C ... 200 °C |
Environmental Product Compliance
| REACH | conform |
| China RoHS | conform |
Dimension
| Depth | 101mm |
| Hole diameter | 58 mm x 61 mm |
| Wire length | 0m |
| 0.4 m (Lock the actuator cable ) | |
| width | 99mm |
| Height | 127.3mm |
TUV parameters
| Overvoltage category/Degree of pollution | III/3 | ||
| Rated voltage | 250V | ||
| Rated current | 32A | ||
| IP class | IP54 |
| numero d'ordine | 22070000039 |
| Unità di imballaggio | 5pcs/box |
| Quantità di ordine minimo | 5 |
| Peso dei prodotti (senza imballaggio) | 13.65 |
