Assistere nella selezione dei prodotti

FEAC-T-032A-P-0.0M
22070000012

Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)

confronto

Tipo di prodotti

Solo 4 prodotti possono essere confrontati ogni volta. Si prega di selezionare i prodotti che si desidera sostituire.

    • Panoramica
    • Dati tecnici
    • Accessori
    • Certificazione
    • Dati aziendali
    • Scarica

    Certificazione del prodotto

    Vantaggi del prodotto

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. Modello 3D
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Lock actuator
    9. Cable
    10. Bag
    11. Temperature Sensor
    12. Environmental Product Compliance
    13. Dimension

    Modello 3D

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power26KW
    Phase3
    Power pin quantity5
    Rated current of high-power contacts32
    Power contact rated voltage480
    Quantity of signal contacts2
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsScrew connection
    Temperature measurementNTC

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force< 100N

    Installation

    Available installation locationRear board installation
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Lock actuator installation locationTop center, can only be installed at the rear
    Mounting hole diameter6.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Locking device

    Lock typeSecured by locking device after insertion

    Lock actuator

    Poles of pluggable connectors3
    Motor possible supply voltage range9-15.5V
    Response time1s
    Service life10000 times load
    Ambient temperature (operation)_40 °C ... 80 °C
    Cable length0.4m

    Cable

    Cable composition2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²
    5*6mm²+2*0.75mm²

    Bag

    colorBlue

    Temperature Sensor

    Sensor typeNTC
    Temperature range_30 °C ... 200 °C

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Dimension

    Depth101mm
    Hole diameter58 mm x 61 mm
    Wire length0m
    0.4 m (Lock the actuator cable )
    width99mm
    Height127.3mm

    TUV parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 480V
    Rated current 32A
    IP class IP54
    numero d'ordine 22070000012
    Unità di imballaggio 5pcs/box
    Quantità di ordine minimo 5
    Peso dei prodotti (senza imballaggio) 13.65
    3D
    FEAC-T-032A-P-03-0.0M-11AH.stp Scarica
    CAD Data
    FEAC-T-032A-P-03-0.0M-11AH.dxf Scarica
    Data
    FEAC-T-032A-P-03-0.0M-11A(H).pdf Scarica
    Online consultation